Complete 3D Stonehenge discussion

GEHFileBot · 01-18-2006, 10:06 AM

This is a discussion thread for the following file:

Complete 3D Stonehenge

I have created a full 3D stonehenge using SketchUp. Hope you enjoy.

shrinkingman · 01-18-2006, 10:17 AM

It may just be me but I can't view this properly. It's not visible if Terrain is turned on, but with it off the 3D stones appear to be several hundred feet above the ground. It's the same on my home PC and at work so it looks like a problem with the file. It's surely not meant to be like this is it?

Captain Hornblower · 01-18-2006, 11:06 AM

Same here. First I thought it is my old fashioned pc that causes the trouble.

@GE4EVR
Could please take care of it.

JMAG117 · 01-31-2006, 07:15 PM

You have to set the elevation exaggeration to 0.5 to view this properly. Remember to keep the default settings in mind when you post somthing to upload! Nice job, otherwise.

bfmtbl · 05-12-2006, 08:09 PM

When I set my settings to .5 it still showed wrong. The majority of the model was still below the ground. I had to set mine to .46 to get it to show properly.

01-18-2006, 10:06 AM	#1
GEHFileBot Senior Member Join Date: Jul 2005 Posts: 3,960	Complete 3D Stonehenge discussion This is a discussion thread for the following file: Complete 3D Stonehenge I have created a full 3D stonehenge using SketchUp. Hope you enjoy.

01-18-2006, 10:17 AM	#2
shrinkingman Senior Member Join Date: Dec 2005 Location: UK Posts: 401	It may just be me but I can't view this properly. It's not visible if Terrain is turned on, but with it off the 3D stones appear to be several hundred feet above the ground. It's the same on my home PC and at work so it looks like a problem with the file. It's surely not meant to be like this is it? __________________ I can only make one person happy per day. Today is not your day. Tomorrow isn't looking good either.

01-18-2006, 11:06 AM	#3
Captain Hornblower Super Moderator Join Date: Aug 2005 Location: Koblenz, Germany Posts: 1,903	Same here. First I thought it is my old fashioned pc that causes the trouble. @GE4EVR Could please take care of it. __________________ Software is like entropy. It is difficult to grasp, weighs nothing, and obeys the second law of thermodynamics; i.e., it always increases. Norman R. Augustine

01-31-2006, 07:15 PM	#4
JMAG117 Junior Member Join Date: Jan 2006 Location: Alabama, USA Posts: 2	You have to set the elevation exaggeration to 0.5 to view this properly. Remember to keep the default settings in mind when you post somthing to upload! Nice job, otherwise. Last edited by JMAG117; 01-31-2006 at 07:16 PM. Reason: typo

05-12-2006, 08:09 PM	#5
bfmtbl Junior Member Join Date: Apr 2006 Posts: 4	Still shows wrong When I set my settings to .5 it still showed wrong. The majority of the model was still below the ground. I had to set mine to .46 to get it to show properly.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode